| High precision Multimeter function (3 3/4 digits) |
| The HDS series handheld digital oscilloscope is equipped with multimeter functions. It includes voltage, current, resistance, capacitance, diode test, continuity test. High resolution and precision design guaranty the accurate testing result. The user can choose the automatic or manual measurement according to different testing conditions. |  |
| Video Trigger |
| The HDS series handheld digital oscilloscope includes NTSC, PAL or SECAM standard video triggers which help to improve the efficiency obviously. |  |
| Capture the pulse signals |
| The HDS series handheld digital oscilloscope provides single trigger function; it can capture the pulse signals once you set the instrument to trigger on a positive or negative pulse of a specified width. |  |
| Observation for instantaneous signal |
| Digital trace mode is a function of analog oscilloscope recurs to the digital one. The function can show the waveform value which base on the time. It will help the user to find the irregular waveform and analyze the complicated dynamic signal. All of our products have the function to refresh the signal and therefore, can observe the instantaneous signal. The function is very useful to make adjustment for the tested system. |  |
| Average Acquisition Mode |
This function reduce random noisy in the signal effectively and quite convenient for the engineer to analyze the waveform by. Below figure is the waveform which achieved after averaging which to show how this function reduces the influence from noisy directly.
|
 | |  |
| Easy to distinguish the signal in any case |
| 3.8” transflective TFT panel enables you to read the waveform clearly even single waveform under hard light. It’s quite useful for observation and analysis. |  |
